gt2logo2 gt2logo2

welcome

Home
Up
FAQ
Documents
Parts Info
Links
Contact Information

 

Old Front Disks

Preparing for new hub adapters. Rotors will be resurfaced.

Old Front Disk Setup

Old adapters to be removed and replaced with tru-spoke adapters.

Rear Brakes Being Retrofitted With Disks

A CB Performance Product. This kit has handbrake inclided

Another view of disk conversion.

Installation is straight forward.

Completed Unit without T-100 hub.

All parts are first rate and come with excellent instructions.

A closeup

A closeup

Front hubs fitted with Tru-Spoke Adapter

Rear disk hub fitted with Tru-Spoke Adapter

A shot of the original wheels and tires.

Front T-100 wheels on hub

Cruiser Wires on Hubs

225ZR50 Firestones mounted on reversed 16 X 9 100 spoke Cruiser Wires with 2 3/8" backspace.

Front Wheel Fit View

Front wheelwell edge to valance had to be trimmed to clear tires for turning.

Rear Wheel Well

No clearance problems

Final Fit

View of vehicle on ground - All clearances good.

GT II on ground with new brakes and wheels

My wheel and tire Supplier

Premier Tire of Picayune

Cruiser Wire Wheels Logo

Click to View

Home Up FAQ Documents Parts Info Links Contact Information
Copyright ©2000-2002  GEM.  All rights reserved.
No material may be used from this site without prior written consent

.

                              

For problems or questions regarding this web contact [WebMaster].

Last updated: 02/13/02.